Our services Category

Light Diffusion PC

Light Diffusion PC
Minimum order quantity: MOQ3000KG, special customized orders can be negotiated.
Production cycle: 3~4 weeks. Quality period: 3~5 years. Not brittle and does not require refrigeration.

Consult

Features Technical Indicators Overall Dimension

Light diffusion PC UV resistance, excellent processability and mechanical properties, suitable for electronic and electrical products, lighting products, etc.

Physical properties	Typical data	unit	method
density	1.20	g/cm³	ASTM D 792
Water absorption, 24 hours, 23°C, 50% RH	0.15	%	ASTM D 570
Shrinkage, Flow Direction 1/8in (3.2mm)	0.5-0.7	%	ASTM D 955
Shrinkage, vertical flow direction 1/8in (3.2mm)	0.5-0.7	%	ASTM D 955
Melt Index, 300°C/1.2kg	12	g/10min	ASTM D 1238
Mechanical properties	Typical data	unit	method
Tensile yield strength, 50mm/min	60	MPa	ASTM D 638
Elongation at break, 50mm/min	100	%	ASTM D 638
Flexural strength, 2.6mm/min, 50mm span	88	MPa	ASTM D 790
Flexural modulus, 2.6mm/min, 50mm span	2100	MPa	ASTM D 790
Cantilever impact strength, 1/8in (3.2mm), notched, 23°C	720	J/m	ASTM D 256
Thermal performance	Typical data	unit	method
Heat deflection temperature, 264psi (1.8Mpa), 3.2mm	120	℃	ASTM D 648

Processing conditions	unit	numeric value	Processing conditions
Drying temperature	℃	100-120	Drying temperature
Drying time	hrs	3-4	Drying time
Maximum moisture content	%	<0.02	Maximum moisture content
Melt temperature	℃	280-300	Melt temperature
Mouthpiece	℃	280-300	Mouthpiece
Anterior paragraph	℃	270-290	Anterior paragraph
Middle	℃	260-290	Middle
Rear segment	℃	250-280	Rear segment
Mold temperature	℃	70-95	Mold temperature
Back pressure	MPa	0.3-0.7	Back pressure
Screw speed	rpm	40-70	Screw speed

Statement:
The above data is strictly tested in the laboratory of Trivos Company in accordance with ASTM standards, and these typical performance data are for general information and reference only. These figures are approximate and not part of the product specifications. We try to give the most accurate data, but we do not guarantee it. The user shall carry out the necessary tests and analyses to determine for himself that the final product is safe and qualified under the conditions under which it will be used.