Our services Category

PES

PES
Minimum order quantity: MOQ3000KG, special customized orders can be negotiated.
Production cycle: 3~4 weeks. Quality period: 3~5 years. Not brittle and does not require refrigeration.

Consult

Features Technical Indicators Overall Dimension

PES material, dimensionally stable, high temperature resistant, flame retardant, good fluidity. Suitable for connectors, auto parts, etc.

Physical properties	Typical data	unit	method
specific gravity	1.37	g/cm³	ASTM D 792
Shrinkage, 1/8in (3.2mm)	0.7-0.9	%	ASTM D 955
MELT FLOW INDEX 360°C/10KG	70	g/10min	ASTM D 1238
Mechanical properties	Typical data	unit	method
Tensile yield strength, 50mm/min	85	MPa	ASTM D 638
Elongation (yield), 50mm/min	7	%	ASTM D 638
Flexural strength, 2.6mm/min, 50mm span	120	MPa	ASTM D 790
Flexural modulus, 2.6mm/min, 50mm span	2500	MPa	ASTM D 790
Cantilever impact strength, 1/8in (3.2mm), notched, 23°C	85	J/m	ASTM D 256
Thermal performance	Typical data	unit	method
Heat deflection temperature, 264psi (1.8Mpa), 3.2mm	205	℃	ASTM D 648
Electrical properties	Typical data	unit	method
Volume resistivity	1.0E+15	Ohm-cm	ASTM D 257
Surface resistivity	1.0E+15	Ohm/sq	ASTM D257
Flame retardant properties	Typical data	unit	method
Fire rating 1.6mm	V0		UL-94

Processing conditions	unit	numeric value
Drying temperature	℃	130-150
Drying time	hrs	4
Maximum moisture content	%	0.02
Melt temperature	℃	340-390
Mouthpiece	℃	340-390
Anterior paragraph	℃	330-380
Middle	℃	320-370
Rear segment	℃	310-360
Mold temperature	℃	140-180
Back pressure	MPa	0.3-0.7
Screw speed	rpm	40-70

Statement:
The above data is strictly tested in the laboratory of Trivos Company in accordance with ASTM standards, and these typical performance data are for general information and reference only. These figures are approximate and not part of the product specifications. We try to give the most accurate data, but we do not guarantee it. The user shall carry out the necessary tests and analyses to determine for himself that the final product is safe and qualified under the conditions under which it will be used.